The Mazda Skyactiv Engine Is Brilliant. Now Make It Fast.

Mazda built the Skyactiv-G engine to be one of the most efficient and responsive naturally aspirated engines on the road. And they nailed it. But efficiency and excitement aren't mutually exclusive — and with a VTSuperchargers supercharger kit, you can have both.

Whether you're driving a Mazda3, Mazda6, CX-3, CX-5, CX-30, CX-50, or Biante with a 2.0L or 2.5L engine, our bolt-on supercharger kit transforms your daily driver into something that genuinely puts a smile on your face every time you press the accelerator.

Why Supercharge Your Mazda?

• Real, noticeable power gains — not a tune, not a filter — forced induction that you feel instantly
• Bolt-on, no permanent mods — works with your factory engine management, no cutting or welding
• Keeps the Skyactiv character — smooth, linear power delivery that feels factory-quality
• Covers both 2.0 and 2.5 engines — find the right kit for your exact model and year
• 24-month / 24,000-mile warranty — every kit, every customer, no exceptions

Watch the Full Installation

Before you start, watch our complete installation video. It covers every step so you go in prepared and come out with a supercharged Mazda.

Compatible Models

Mazda 2.0 Skyactiv-G

• Mazda3 2.0 (2014–2023)
• Mazda6 2.0 (2014–2024)
• Mazda CX-3 2.0 (2016–2025)
• Mazda CX-5 2.0 (2013–2025)
• Mazda CX-30 2.0 (2020–2023)
• Mazda Biante 2.0 (2013–2018)

Mazda 2.5 Skyactiv-G

• Mazda3 2.5 (2014–2023)
• Mazda6 2.5 (2014–2024)
• Mazda CX-30 2.5 (2020–2023)
• Mazda CX-50 2.5 (2020–2024)

What's in the Box

• VTSuperchargers twin-screw supercharger unit
• Supercharger bracket and all mounting hardware
• Idler pulleys and tensioner
• Supercharger drive belt
• Inlet coupler and clamps
• Full installation instructions with torque specs and belt routing diagram

What You'll Need

• Basic hand tools (metric socket set)
• Torque wrench
• Serpentine belt tool
• Thread locker (medium strength)
• Clean shop rags
• Estimated install time: 4–6 hours

Step-by-Step Installation Guide

Step 1: Prep Your Workspace

Engine fully cool, negative battery terminal disconnected. Unbox the kit, verify all parts against the checklist, and watch the video above before you start. Seriously — it makes everything smoother.

Step 2: Remove the Stock Intake

Pull the factory air box, intake tube, and ducting. On CX-5, CX-30, and CX-50 models, additional brackets or resonators may need to come out too. Photograph or label everything before disconnecting.

Step 3: Install the Bracket and Pulleys

Mount the supercharger bracket to the engine block and torque to spec. Fit the idler pulleys and tensioner with medium-strength thread locker on all fasteners.

Step 4: Mount the Supercharger

Position the supercharger on the bracket, thread bolts in by hand to confirm alignment, then torque to spec. Connect the inlet to the throttle body with the supplied coupler and clamps — get a tight, leak-free seal.

Step 5: Route the Drive Belt

Follow the belt routing diagram in your kit. Use a serpentine belt tool to seat the belt under tension. Confirm correct seating on every pulley before releasing.

Step 6: Button Everything Back Up

Reinstall all intake components, vacuum lines, PCV hoses, and electrical connectors. Check every clamp. Nothing kinked, nothing loose.

Step 7: Fire It Up

Reconnect the battery, start the engine, and let it idle. Listen for boost leaks, check oil pressure and coolant temp. That supercharger whine? That's the sound of a good decision.

Step 8: Get It Tuned

A professional tune is strongly recommended to maximise power and protect your engine. Take it easy for the first 50–100 miles, then enjoy every kilometre after that.

Your Mazda Was Made for More. Prove It.

The VTSuperchargers kit is the single best upgrade you can make to your Mazda — more power, more excitement, and the same reliability you already love. Find your kit below and let's get started.

Shop Mazda Supercharger Kits by VTSuperchargers →

Warranty & Support

Every kit is backed by our 24-month / 24,000-mile warranty. Our technical support team is here whenever you need us — before, during, and after your install.